GPU driver misplay, no temps - What is going on? Please Assistanc

r/HiveOS - GPU driver error, no temps - What is going on? Please HELP

Log on or sign up to go forth a notice

level 1

Try lowering the memory oc. Was the solution for me when I got that error.

level 1

Clear out each your OC's...just blue-pencil everything. Then fire information technology awake...same issue? If so, you OC's are too aggressive.

Maybe even turn off auto fan...didn't cultivate advisable for me.

raze 2

I have the same issue connected my rig which is 4x3070 and 2x3080 " the driver error, atomic number 102 temporary worker" is incidental to which cards?

level 1

any luck? running into the same issue

grade 2

You fixed IT? Having similar issue on my 3080 rnow.

even out 1

I had this problem and I suspect that the individual from 5 months agone had the same issue. The hive variant is out of date. I updated information technology and this problem went forth for me.

level 1

did your problem fixed i am also facing same job

level 1

I receive 3 x Zotac 3060ti with hynix memory. Nvidia 470.74 driver. I tried on T-rex/lolminer/nbminer. OC are 1300 clock/ 1400 computer storage/ 145 pl, 80% fan. I get same error randomly. With aged versions it works fine but low hashrate just about 30MHs. When I try to use lhr unlock versions of mineworker I start getting these errors

flush 2

1600 clock, 2700 memory, 130 Watt and 70% Oregon above winnow is what I use with Lolminer on hiveos. I convey about 45 Mh/s with my 3060 titanium LHRs. With hynix you should be doing 1610 time.

level 1

I'm having the selfsame issue. Proved everything mentioned to a higher place. Does anyone else have any other suggestions?

level 1

I had the same issue as substantially and could non run my swindle more than 25minutes before getting that error. I wealthy person 4 x LHR 3060ti's and 1 x 3080 ti mining ETH connected NBMiner. I noticed my Lade medium going above 5.0 caused this to happened so I upset on Hashrate watchdog and set the "Boot if LA >=" value to 25 (the recommended value) and lowered my OC memory settings down on my 3060ti's. It has been 8hours+ and so far and my outfit has been running swimmingly with No hiccups. Also if you turn HashRate Guard dog happening and go for settings I would recommend amply powering off your rig and booting up again atomic number 3 my settings did not actually give until I did so.

tier 2

how to to pick up which GPU has the problem ? information technology's non showing when i click on the error message just codes.

steady 1

I have sex this is an old thread but I had the same issue, along with Dkg is damaged message.

My solution was in this order:

  1. Put up the OC every last punt to default

  2. Disconnected the flight of stairs sheet

  3. Rebooted the set up by typing 'sreboot wakealarm'

  4. Erstwhile rebooted all was connected and showing in my overview tab,

  5. Relaunched the flight sheet and all started working again.

Hopefully this helps.

story 2

Satisfying only happens to ME on hotter years for whatever reason out .

steady 1

solution for the error problem is to modify the GPU overclocking and it works at 100% I have a Radeon RX 6600 XT and I had this error "gpu driver wrongdoing no temps hiveos"

and IT is already working 100%

tear down 1

And so when you see this error information technology 99% going to be your overclock settings. GPUs have silicon lottery meaningful non all can handle the same overclocks, I would reduce the memory clock in increments of 100 until your rig starts running.

level 1

I had indistinguishable error non able to find answer for about 7 hrs later on then i distinct to make physical review of rig and institute that my PCIE cable television was burned therefore psu was not able to legislate efficient great power to gpu! i changed cable and now its been 4 hrs and no resume/no error!

stage 1

Update HiveOS to modish interpretation 0.6-213@211223 + get down retention clocks. Has been stable for 4+ hours, whereas IT didn't last 20 minutes.

level 1

I was having the same issue I JUST TOOK Away ALL MY OC SETTINGS, REBOOT THE RIG AND I ADDED NEW OC. Your OC settings may cost the resolution

2007 Bmw 535 Cooling Fan Not Coming on High Temp

Source: https://www.reddit.com/r/HiveOS/comments/mcskj6/gpu_driver_error_no_temps_what_is_going_on_please/